CVR700 OM 12/17/04 4:23 PM Page 31
Cinemavision CVR700
n DTS Neo:6 Mode/Broadcasts IR Transmitter/Receiver: The
Preset Button: This buttonOs functioninfrared emitters and receivers behind
varies depending on whether the Systemthe plastic lens at the top of the remote
or Screen mode has been selected.communicate the remote codes to the
CVR700 and other programmed devices.
In System mode, this button is used toBe certain that the lens is not covered
select a DTS Neo:6 audio surround mode.when using the remote, and point the
See page 62 for more information on thelens toward the CVR700 for the best
available DTS Neo:6 options.results. In learning mode, the remote
In the Screen mode, pressing this buttonreceives IR codes to be learned through
automatically adjusts the screenOs picturea receiver behind the lens. See page 78
settings to preprogrammed settings thatfor more information on learning remote
are recommended as optimal for viewingcodes.
broadcast television programs.
NOTE: The Sports/Broadcast/ MoviesNOTE: DO NOT remove the rubber plug
Buttons imnoptimize picturethat is supplied to cover the jack on the
settings for a specific viewing medium.upper right side of the remote. The jack is
The Broadcast settings are the most neu-not active and is reserved for future use.
tral, balanced and accurate, and are opti-
mized for clarity. The Movies settings are
softer and less bright. The Sports settings
are more vibrant and optimized for fast-
moving action.
o DTS Digital Surround Mode
Button: In System mode, when a DTS-
encoded digital source is playing, each
press of this button will scroll through the
available DTS audio surround modes. The
specific choice of modes will vary accord-
ing to the type of encoding on the disc
and your systemOs speaker configuration
(5.1-channel or 6.1/7.1-channel). See
page 62 for more information on DTS
modes.
p Dolby Surround Mode Button:
In System mode, this button is used to
select from the available Dolby audio sur-
round modes. Each press of this button
will select one of the Dolby Pro Logic II
(available in 5.1-channel systems) or IIx
(available in 6.1/7.1-channel systems)
modes, Dolby 3 Stereo, or Dolby Digital
when a Dolby Digital-encoded source is
in use. Each press of this button will
scroll through the available modes. See
page 62 for more information on Dolby
modes.
q Mute Button: Press this button to
momentarily silence the CVR700. Press
it again, or use the Volume Up/Down
Control K to restore audio.
r EzSet Microphone Sensor: The
microphone sensor that is used by the
EzSet system is behind the three slots
at the top of the remote control. When
using EzSet to calibrate the CVR700, be
certain that the slots are not covered.
See page 51 for more information
on EzSet.
23
434547495557
3334354232363744262738394628252440414850513752533736363541544756313029293023353433343332383940464544434248495051
31222128203231
172112539283261409415211052716221162817231229182430
313437323448333945344046354147364248 |
ACEC
